Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Tigard, OR
Chimney inspection in Tigard usually starts with a simple question a homeowner can’t answer alone: what’s actually inside the flue of a 1970s masonry fireplace after years of damp, smoldering fires? We’re a chimney company that works on Tigard homes regularly, and the answer is rarely dramatic but often specific – glazed creosote, a damper that no longer seals, sometimes a nest in an uncapped flue. One call covers sweep, inspection, and repair with professional-grade materials. Call (833) 538-5519 for a free estimate.
Why Tigard Homes Are Different
Tigard was built on former dairy and filbert-orchard land in the Tualatin Valley, and the subdivisions that replaced those farms went up mostly between the 1960s and 1990s. That single fact shapes almost every chimney job here. This is a wood-burning suburb, not a gas-log suburb. Technicians spend their days inside ranch and split-level homes with masonry fireplaces and, in newer builds, factory-built metal chimneys, and the work is about creosote and moisture more than the historic masonry restoration you’d find on older houses in Portland or Oregon City.
The climate does the rest. Willamette Valley winters are wet and cool, rain rather than snow, so a chimney stays cold and damp between burns. That accelerates creosote glazing and allows third-degree buildup to form where a hot fire would have burned it off. The same constant moisture rusts metal flues and works on mortar through freeze-thaw cycles. In Tigard’s older subdivisions, summer sweeps routinely pull nests and debris from uncapped flues, and the glazed creosote from burning wet fir and alder often needs chemical sweeping rather than a standard brush.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Tigard Services
Most Tigard homeowners call us about two things: getting the chimney swept before the burning season, and figuring out whether a repair is genuinely needed.
Chimney Sweep in Tigard
A sweep in Tigard is usually a masonry fireplace that’s seen a lot of damp-wood fires. We brush the flue, clear the firebox and smoke shelf, and check the damper and cap while we’re up there. Because so much of the creosote here is glazed rather than powdery, some Tigard chimneys need a chemical treatment before brushing will do any good. If yours is one, we’ll tell you and explain why. For the full rundown and how to book, see Chimney Sweep in Tigard.

Chimney Repair in Tigard
Repair work here tends to involve the parts moisture attacks first: rusted metal flue sections, cracked mortar crowns, dampers that no longer close, and fireboxes in original 1970s masonry that have never been relined. We install DuraFlex flexible liner systems where a full reline is the right call, and we use HeatShield resurfacing where a damaged liner can be restored instead of replaced. Caps and ventilation components come from Gelco, Famco, and Copperfield. Details are on our Chimney Repair in Tigard page.

Chimney Inspection in Tigard
Chimney inspection in Tigard is mostly about telling the truth to people who own 1960s to 1990s ranch and split-level homes with original fireplaces. We look at a lot of masonry boxes in this city that have burned wet fir and alder for a long time and never been looked at closely. Our Chimney Inspection gives you a clear picture of what’s actually inside the flue, the firebox, and the cap, with photos you can see for yourself. The wet Willamette Valley climate is the reason we push for a real inspection rather than a quick brush-and-go: damp chimneys glaze creosote faster, rust metal flues sooner, and lose mortar to freeze-thaw before anything visible shows up in the living room.
Chimney Inspection Services
Signs you need it
You’ve never had the chimney looked at since moving into a Tigard home, or you notice staining on the firebox, a damper that won’t seal, or flakes of creosote falling into the box when you open it.
What it costs in Tigard
A standard inspection typically runs $150 to $275, and we confirm the figure with a written estimate before any work starts.
How we do it
We inspect the firebox, damper, smoke chamber, flue, cap, and crown, run a camera through the flue where the geometry or buildup calls for it, and hand you a photo report with clear notes on what’s safe, what needs watching, and what needs repair.
Level 2 Chimney Inspection
Signs you need it
You’re closing on a Tigard house, changing to a different fuel or appliance, or you’ve had a chimney fire or a seismic event that may have cracked hidden masonry.
What it costs in Tigard
A Level 2 inspection typically runs $250 to $450, and the written estimate sets the final price.
How we do it
We cover everything in a standard inspection plus the accessible portions of the attic and crawlspace, checking joints, offsets, and clearances that a basic look from the firebox can’t reveal.
What Chimney Inspection Costs in Tigard
| Item | Typical range in Tigard |
|---|---|
| Standard chimney inspection | $150 – $275 |
| Level 2 chimney inspection | $250 – $450 |
| Camera inspection with photo report | Included with inspection |
Do I really need a Level 2 inspection on a Tigard ranch home?
Not always. A Level 2 makes sense when you’re buying or selling, changing the appliance, or after a chimney fire. For a routine once-over on a fireplace you’ve used for years, a standard inspection is usually enough. Call (833) 538-5519 and we’ll tell you which one fits your house.
What actually happens if I skip the inspection?
Glazed creosote and rusted metal flues don’t fix themselves, and damp Willamette Valley air keeps working on them between burns. Skipping a check mostly means finding a small repair later at a larger one’s price. Call (833) 538-5519 for a free estimate.
Brands We Service in Tigard
We install and work with professional-grade products from DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield, the same lines specialists specify for liner systems, resurfacing, caps, and components. Most Tigard jobs can be quoted with a written estimate within a day or two of the visit. See our brands for the full list of what we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Tigard, OR
| Service | Typical range in Tigard |
|---|---|
| Chimney sweep | $180 – $340 |
| Standard chimney inspection | $150 – $275 |
| Level 2 chimney inspection | $250 – $450 |
| Chimney cap installation | $180 – $450 |
| Crown repair | $300 – $900 |
| Damper repair or replacement | $250 – $700 |
| HeatShield liner resurfacing | $1,200 – $2,800 |
| DuraFlex liner installation | $2,500 – $6,500 |
| Firebox repair | $600 – $2,000 |
| Chimney fire damage assessment | $250 – $450 |
What pushes price up in Tigard is usually access and condition: a two-story roof, a glazed flue that needs chemical treatment before brushing, or a firebox that turns out to need relining rather than a patch. Every job is priced per job by the written estimate, agreed before we start.
Neighborhoods We Serve in Tigard
We work across Tigard’s subdivisions, from the older ranch streets near Tigard High to the split-levels and newer builds toward Bull Mountain, Summerfield, and Durham Road. Because most of these homes share the same 1960s-to-1990s construction and the same wet-winter creosote problem, a sweep or inspection booked in one part of Tigard usually looks a lot like one booked in another. Timing depends on the season; call and we’ll find the next opening.
- Tigard High area
- Bull Mountain
- Summerfield
- Durham Road corridor
- Metzger
Service Area – Cities Near Tigard
We also work the communities that ring Tigard, and the same Willamette Valley climate and mid-century housing stock follow us out the door. If you’re just outside the Tigard line, check the nearest page for your city: Tualatin, OR, West Linn, OR, Gladstone, OR, and Oregon City, OR. Call (833) 538-5519 and we’ll confirm coverage and timing for your address.
Serving Tigard, OR – Our Local Coverage Area
We serve Tigard and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Tigard
Yes. We cover the full city, from the older ranch neighborhoods near downtown Tigard out to Bull Mountain and the Summerfield area. Call (833) 538-5519 with your address and we’ll confirm timing for your street.
Some repairs do and some don’t, and the line depends on the work. City permitting rules can change, so we confirm the requirement with the city’s building department before any job that may need one. You’ll know before we start.
Before the burning season, ideally in late summer or early fall, so the flue is clean before wet-weather fires start building creosote. Spring also works well for a post-season check. Call (833) 538-5519 to book the next available slot.
Call (833) 538-5519 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tigard Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Ernesto Herrera"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Heather Kowalski"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Craig Quinn