Chimney Company in Gladstone - Flat-Price Sweep, Photo Report Included

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (833) 538-5519

Flat price quoted before we book

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Chimney Company in Gladstone, OR

Chimney inspection in Gladstone starts with a simple fact: much of this town’s housing went up before modern chimney codes, and a lot of the fireplaces and wood stoves in those homes were added or converted without a permit. That makes inspection the first job, not the last – we want to see the liner, the smoke chamber and the crown before anyone sweeps and leaves. Gladstone sits on the Clackamas River at the edge of the Portland metro, and plenty of homes here rely on wood as the main winter heat. Call (833) 538-5519 to book a visit.

Call (833) 538-5519

Why Gladstone Homes Are Different

Gladstone is a small, older Clackamas County river town, and the housing stock tells you most of what you need to know before we arrive. Most of the single-family homes here date from the post-WWII years through the 1970s, with original brick masonry fireplaces, later wood-stove inserts, and some older riverfront properties mixed in. Original clay tile liners and unlined masonry are common, which is why insert-to-flue fit and relining come up so often on Gladstone inspections.

Then there’s the weather. Willamette Valley winters are wet and mild, with heavy rain and the occasional ice, and chimneys here spend months damp. That damp promotes spalling mortar and rusted dampers, and it turns creosote glazed and hard to remove. Shoulder-season cool snaps drive heavy wood-burning in fall and early winter, so by the time the first real cold arrives, whatever built up in the flue is already there. A Gladstone chimney that looks fine from the driveway is often wet inside.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Our Main Gladstone Services

Two services cover most of what Gladstone homeowners call us about, and both are handled by the same team from start to finish.

Chimney Sweep in Gladstone

A sweep here is rarely a quick brush-and-go. Because so many Gladstone homes burn wood as primary heat rather than for decoration, creosote builds up fast and often glazes hard against the flue walls, especially after a damp winter. We sweep the full run of the flue, the firebox and the smoke shelf, then check what the brush loosened against the liner condition. When the flue is too glazed for standard sweeping, we say so and explain what’s next. You can book a chimney sweep and know the chimney gets a real look, not a pass with a brush.

Chimney Sweep in Gladstone

Chimney Repair in Gladstone

Repair work in Gladstone leans toward masonry and liner fixes, because the housing stock is old and the river-valley air is wet. Spalling mortar, crumbling crowns and rusted dampers turn up often, and when the clay tile liner is cracked or the flue was never lined at all, relining is the fix. We install DuraFlex flexible liner systems for relining and apply HeatShield resurfacing where the liner can be restored rather than replaced. Caps and venting come from Gelco, Famco and Copperfield. When something needs fixing, we handle the chimney repair rather than sending you to a second contractor.

Chimney Repair in Gladstone
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (833) 538-5519

Chimney Inspection in Gladstone

Gladstone’s mid-century masonry fireplaces and converted wood stoves were often installed without permits, and the wet Willamette Valley climate works on them year after year. Inspection is how we find out whether the liner, damper and smoke chamber are actually sound before the burning season starts. Our Chimney Inspection combines a visual assessment with a camera run where it’s needed, and you get the findings in plain language.

Level 2 Chimney Inspection

A Level 2 inspection goes beyond what the eye can see from the firebox. It’s the right call in Gladstone whenever a property has changed hands, a stove or insert was added, or a chimney fire may have happened, because the hidden parts of the flue are where the problems live.

Signs you need it

You’ve bought or are buying an older Gladstone home, added a wood stove or insert, or had a chimney fire or a strong draft problem that a basic look didn’t explain.

What it costs in Gladstone

A Level 2 inspection typically runs $150 to $350 in Gladstone, and a camera inspection with a photo report is included so you see what we see.

How we do it

We inspect the accessible interior and exterior of the chimney, run a camera down the flue to record the liner’s condition, check the attic and roof-level components, and hand you a written report with photos.

Chimney Fire

Most chimney fires in Gladstone are slow, quiet burns that a homeowner never hears. The damage they leave behind – cracked tiles, warped dampers, glazed creosote – isn’t visible from the hearth, which is why a post-fire inspection matters before the chimney gets used again.

Signs you need it

You’ve heard a roar or popping from the flue, seen puffy or honeycombed creosote, noticed cracked exterior masonry, or had a strong burning smell after a fire.

What it costs in Gladstone

A post-chimney-fire inspection with camera runs $150 to $350, with any repair priced separately from the written estimate.

How we do it

We sweep what’s loose, run a camera the full length of the flue, probe the joints and damper, and tell you plainly whether the chimney can safely be used or needs repair first.

What Chimney Inspection Costs in Gladstone

Item Typical range in Gladstone
Standard chimney inspection (Level 1) $99 to $250
Level 2 inspection with camera and photo report $150 to $350
Post-chimney-fire inspection and assessment $150 to $350

Does an older Gladstone home need a Level 2 inspection before you sweep?

Yes, when the chimney has never been inspected, the home recently changed hands, or an insert was added. On unlined or original clay tile flues, the camera comes first so the sweep doesn’t hide a defect.

How long does a chimney inspection take in Gladstone?

Most inspections take about an hour, and a Level 2 with camera work can run longer if the flue is hard to access. We don’t rush the parts that tell us whether the chimney is safe to burn.

Brands We Service in Gladstone

Repair and installation work on Gladstone chimneys is done with professional-grade products from lines we know well, including DuraFlex, HeatShield and Famco, so a fix is built to last rather than improvised. We don’t stock parts locally; most components are ordered and turnaround runs a few days to a couple of weeks depending on the item. You can read more on our brands page.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 538-5519

Pricing for Chimney Company in Gladstone, OR

Service Typical range in Gladstone
Standard chimney sweep $150 to $300
Wood stove or insert sweep $175 to $350
Standard chimney inspection (Level 1) $99 to $250
Level 2 inspection with camera and photo report $150 to $350
Post-chimney-fire inspection and assessment $150 to $350
Chimney cap supply and install $175 to $450
Masonry crown repair $300 to $900
Tuckpointing and mortar repair $300 to $1,200
HeatShield liner resurfacing $1,800 to $3,500
DuraFlex liner installation $2,500 to $6,000

In Gladstone, the older masonry stock and the wet valley air are what push price up: more homes here need relining, crown work or tuckpointing than a newer suburb would, and hard glazed creosote takes longer to clear. The written estimate sets the final price, and the estimate is free.

Neighborhoods We Serve in Gladstone

We work all across Gladstone, from the older blocks near the Clackamas River where dampers rust open and mortar joints crumble, out through the post-war streets up the hill. River-valley lots tend to sit lower and stay wetter, which shows in the masonry; the higher streets dry out faster but still carry mid-century fireplaces with original clay liners. When you call, we’ll book you into the next opening and give you a window for the visit.

  • Riverfront blocks near the Clackamas River
  • Older downtown Gladstone streets
  • Post-war homes along Portland Avenue
  • Wood-stove properties on the hill streets above the river

Service Area – Cities Near Gladstone

Gladstone sits close enough to our Gresham base that it’s a regular stop, and we cover the towns around it the same way. If you’re just across the river or down the highway, we can get to you: homeowners in West Linn, OR and Oregon City, OR call on us for the same inspection-first approach, and we also work in Damascus, OR and Tualatin, OR. Tell us where you are and we’ll book the visit.

Serving Gladstone, OR – Our Local Coverage Area

We serve Gladstone and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Company in Gladstone

Ready to get started? Free estimates in Gladstone
Call (833) 538-5519

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney cleaning pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Gladstone Customers Say

★★★★★ 4.8 from 6+ reviews

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

- Ernesto Herrera

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Heather Kowalski

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Craig Quinn

How It Works in Gladstone

Getting your chimney cleaning project started is simple.

1

Call or Request a Free Estimate

Tell us about your chimney cleaning project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Gladstone. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7