Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Gresham
Chimney repair in Gresham usually starts with water. Wet winters, cracked crowns on older masonry, and gorge winds that strip caps off the roofline all push the same damage forward, and most of it shows up before anyone lights a fire. We work on chimneys here as a specialty, not a sideline, which means a repair call in Gresham gets a real diagnosis of the crown, the flashing, and the flue instead of a quick patch. If something’s failing, you’ll see the evidence. Call (833) 538-5519 and we’ll set up a free estimate.
Why Gresham Homeowners Call Gresham Chimney Sweep for Chimney Repair
Gresham is where a lot of East Metro families land when they want a single-family house with a yard, and a large share of those homes are 1950s through 1980s ranches and split-levels with original masonry fireplaces. That housing stock has predictable problems. Crowns go porous, clay-tile flues crack, and dampers rust shut through the wet season. We know the pattern because we work on it constantly, and we can tell you plainly whether a repair can wait until spring or needs to happen before the rain settles in.
Our technicians have up to 14 years of experience, and the same team handles the sweep, the inspection, and the repair, so you’re not handed off to a second contractor when a problem turns up. We also work with professional-grade materials – DuraFlex and HeatShield among them – rather than generic supplies. If you want an honest read on a chimney in Gresham, call and we’ll talk through what you’re seeing.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Gresham
Chimney Flashing Repair in Gresham matters most where the chimney meets the roof, since that joint takes the full weight of a wet winter and no valley town gets more rain driven sideways than we do on the east side of Portland. Flashing is the metal that seals that seam, and when it lifts, rusts, or was installed without a proper counter-flashing into the masonry, water tracks down into attic framing and ceiling drywall instead of running off the roof. A typical flashing repair in Gresham runs $350-$900, with the written estimate setting the final price once we’ve seen the roof pitch and how much of the old metal can be reused.
What a flashing repair covers
A proper repair means pulling the old step and counter-flashing, clearing out failed sealant, and re-laying metal that laps correctly against the masonry and ties back into the shingles. It also covers the cricket or backer flashing on the uphill side, where water pools against the chimney on lower-pitched roofs. Anything short of that just pushes the leak a season or two down the road.
Signs water is getting past the flashing
Staining on ceiling drywall near the chimney chase, damp framing smelled in the attic, and rust streaks on the firebox or damper all point to water entering above. On Gresham homes with a chimney on an exterior wall, that leak often shows up on the opposite side of the chase first. If you see it, get it looked at before the wet season returns.
Chimney Crown Repair in Gresham
Chimney Crown Repair in Gresham is the most common masonry fix we quote, because the postwar ranch and split-level homes around Centennial, Rockwood, and downtown Gresham were built with crowns that were never sealed, and decades of rain and occasional valley snow have left many of them cracked and porous. The crown is the concrete cap at the top of the chimney, and its job is to shed water away from the brick below. When it cracks, rain soaks straight into the masonry and spalling brick and a rusted damper follow through the wet season. Typical crown repair in Gresham runs $400-$1,200, with a full rebuild of a badly deteriorated crown at the higher end.
Sealing versus rebuilding
If the crown is intact but porous, a bonded resurfacing product can restore it without demolition. If it’s cracked through, has lost its overhang, or has separated from the flue, it needs to be rebuilt with a proper slope, a drip edge to throw water clear of the brick, and a bond break so it can move with the chimney. We use HeatShield where resurfacing is the right call on the flue, and proper crown mixes where it isn’t.
Why the overhang matters
A crown that stops short of the chimney’s edge lets water run down the face of the brick instead of off the top. That’s how staining and spalling start on the upper courses, long before anything shows inside the house. Getting the overhang right on the rebuild is what keeps it from coming back.
Trusted Brands We Service in Gresham
Repair work on a Gresham chimney is only as good as what goes into it, so we use professional product lines rather than whatever a hardware store happens to carry. DuraFlex flexible liner systems are the standard for relining, HeatShield resurfacing restores a damaged flue where a full liner isn’t necessary, and Olympia Chimney, Famco, and Copperfield components cover the caps, covers, and ventilation parts that finish the job. We don’t claim to stock every part on a shelf, but we can get the right component and install it correctly, which is what matters when a cap has been torn off and the flue is open to the weather.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Gresham Homes
- Cracked, porous crowns on older masonry fireplaces. The 1950s to 1970s homes through Centennial and Rockwood were often built with crowns that were never sealed, and once they go porous the brick below starts spalling and the damper rusts. By the time the owner notices, the damage has usually worked a couple of courses down.
- Wind-torn caps and top seals on the east side. The east wind events that funnel down the Columbia Gorge and rattle the newer subdivisions near Persimmon and Hogan are strong enough to tear a cap off outright. Calls for cap and top-seal work spike in Gresham right after a gorge windstorm in a way they don’t in more sheltered parts of Portland.
- Failing flashing at the roof line. With Gresham’s wet winters, a lifted or rusted step flashing leaks for months before anyone sees a stain. Water tracks into attic and ceiling framing and quietly rots the chase.
- Degraded clay-tile or unlined flues. Original clay-tile flues in older Gresham homes crack with age, and an unlined chimney never had a proper barrier to begin with. The result is poor draft and heavier creosote loading, which makes the whole system harder to keep clean.
- Glazed third-degree creosote. Homes that burn wood as a main heat source build up the hard, shiny creosote that a brush won’t touch. It sits through the shoulder seasons and takes a chemical treatment or rotary cleaning to remove.
Pricing for Chimney Repair in Gresham, OR
Chimney repair pricing in Gresham is set per job, and the written estimate is what sets the final number. As a rough guide for this market: a flashing repair typically runs $350-$900, a crown seal or rebuild $400-$1,200, and a partial rebuild of the top courses $1,500-$4,500. Tuckpointing and mortar repointing on a chimney face generally lands between $600 and $2,500 depending on how many joints are failing. What moves the number is access, the height of the chimney, how far the water damage has spread into the brick, and whether a liner is involved. We give you a free written estimate and tell you plainly when a repair can safely wait until spring.
We Also Serve Cities Near Gresham
The same crew that works in Gresham covers the surrounding East Metro, including Troutdale, Fairview, Damascus, and Gladstone. The housing stock shifts as you move out – more rural properties and wood stoves toward Damascus, more established tract homes toward Fairview – but the repair work follows the same logic: find where water is getting in, check the liner, and fix what’s actually failing. If you’re just outside Gresham, call and we’ll confirm coverage.
Serving Gresham, OR – Our Local Coverage Area
We serve Gresham and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Gresham
It’s a repair if the crown is intact but porous, and a rebuild if it’s cracked through, separated from the flue, or missing its overhang. A bonded resurfacing product restores a sound-but-weathered crown; a rebuild replaces it with a properly sloped crown, drip edge, and bond break. We’ll tell you which one your chimney needs once we’ve seen it up close. Call (833) 538-5519 for an exact quote – estimates are free.
When wood is your primary heat, sweep annually at minimum, and consider every six months if you’re burning steadily through the wet season. Gresham’s shoulder seasons leave creosote sitting in the flue longer, and heavy primary burning builds third-degree glazed creosote faster than a fireplace used a few nights a week. Burning dry, seasoned wood helps slow the buildup. Call (833) 538-5519 to book a sweep and inspection.
Gorge east-wind gusts are the reason – they’re strong enough to tear a cap off the flue and drop debris in behind it. That’s why cap and top-seal calls spike in Gresham right after a windstorm, especially on the eastside subdivisions. A properly fastened cap with the right mount holds up far better than one that was pushed on and screwed down loosely. Call (833) 538-5519 for a look at what’s on top of yours.
Third-degree creosote is the hard, glazed, tar-like layer a brush won’t remove, and it needs a chemical treatment or rotary cleaning to clear. It builds up in homes burning wood as a main heat source and sits through the shoulder seasons, which is exactly when it should be dealt with. Left alone, it narrows the flue and raises the risk of a chimney fire. Call (833) 538-5519 to schedule a cleaning and inspection.
A proper flashing repair covers pulling the old step and counter-flashing, re-laying metal that laps correctly into the shingles and ties back into the masonry, and checking the cricket on the uphill side. Sealant alone won’t fix a leak that has already started. In Gresham’s wet winters, a leak that tracks into the attic framing needs attention before the next storm season. Call (833) 538-5519 for a free estimate.
If your chimney is showing cracks in the crown, water stains near the roof line, or a cap that’s gone missing after the last gorge windstorm, call (833) 538-5519. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our team will come out, take a close look at the crown, flashing, and flue, and give you a free written estimate before any work begins. One call covers the sweep, inspection, and repair, and nothing gets recommended that you can’t see the evidence for yourself. For homeowners in Gresham who burn wood as their main heat, that’s the visit that keeps the chimney safe for the season ahead.
Written by the team at Gresham Chimney Sweep.