Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Tigard
Tigard runs on wood. Most of the homes here are 1960s to 1990s ranch and split-level houses built on what used to be dairy and filbert-orchard land in the Tualatin Valley, and a lot of them still heat with the fireplace or a wood stove. That means real creosote, not the tidy gas-log problem some suburbs have. We sweep those chimneys, inspect the flue and firebox, and handle the repairs when we find them. Same team, one call. Call (833) 538-5519. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Tigard Homeowners Call Gresham Chimney Sweep for Chimney Sweep
We know this town’s housing. The streets off Highway 99W and around Tigard High School are full of 1970s and 80s masonry fireplaces that have never been relined, and the newer builds out toward Bull Mountain carry factory-built metal chimneys that rust in our wet winters. That mix shapes how we sweep and what we look for.
Our technicians have up to 14 years of experience, and they work on chimneys only. Not roofs, not gutters, not general handyman calls. We’re state-licensed and we work with your insurer when a repair needs a claim. Everything we quote is set per job by a written estimate, so you know the number before we start.
When we find a problem, we can show you the camera evidence from inside the flue before we recommend a dollar of work. If your chimney can safely wait until spring, we’ll say so. That’s the whole point of hiring a specialist instead of a generalist who guesses.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Tigard
Chimney Services in Tigard start with a sweep, and for most wood-burning homes here that’s the annual baseline. A standard sweep with an inspection runs about $180 to $340 depending on the flue and how much buildup we find. Homes burning damp fir and alder often need more than a brush, which pushes the job toward the higher end. Every service comes with a flat price agreed before we book.
Annual Sweep and Creosote Removal
A yearly sweep clears soot and loose creosote from the flue so draft stays strong and the firebox stays safe. When creosote has glazed into a hard, tar-like layer, a standard brush won’t cut it, so we use chemical treatment to break it down before sweeping. This matters more in Tigard than in drier places because cold, damp flues glaze faster.

Soot and Fireplace Cleaning
We clean the firebox, smoke chamber and damper along with the flue, then haul the soot out with a camera inspection and photo report included. If a firebox has never been relined and the damper is undersized or stuck, the cleaning is also when we catch it.

Chimney Sweep Certified in Tigard
Chimney Sweep Certified work in Tigard means the technician inspects to a defined level, not just runs a brush and leaves. A Level 1 inspection covers the readily accessible parts of the chimney and firebox, and it’s the right call for routine annual upkeep on a home with no known problems. A Level 2 inspection goes further, using a camera to look inside the flue and check the liner, and it’s what you want after a chimney fire, a liner concern, or before you buy a house here.
What Certification Actually Checks
The inspection looks at the flue liner, the crown, the flashing, the cap and the damper, and confirms the appliance is venting the way it should. On Tigard’s older ranch homes we regularly find original fireboxes that were never relined and undersized dampers that were never corrected. The inspection is where those get caught before they become a bigger bill.
Camera Inspection and Photo Report
We include a camera inspection and a photo report with the sweep, so you see what we see. Nothing gets recommended without evidence you can look at yourself. If the liner is sound and only the cap is missing, that’s what we tell you.
Trusted Brands We Service in Tigard
Repairs hold up when they’re done with the materials professionals specify. We install DuraFlex flexible liner systems, the professional standard for relining a chimney, rather than improvised or off-brand substitutes. When a liner is damaged but doesn’t need full replacement, we resurface it with HeatShield, a specialist repair many sweep-only companies can’t offer. Caps and ventilation components come from Copperfield and Famco product lines so the repair addresses the whole system, not just the flue. We don’t keep parts on hand, but these are established brands we source and install, and turnaround stays quick. Repairs, sweeps and inspections are all handled by the same team, so you’re not handed off when a problem turns up.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Tigard Homes
- Glazed second- and third-degree creosote. Burning damp fir and alder in a cold, rain-chilled flue glazes into tar a brush can’t remove, so an ordinary sweep leaves it on the liner. It has to be treated chemically before the flue is clean.
- Nests in uncapped flues. In older Tigard subdivisions, squirrels and birds move into open chimneys over summer. By the first fall burn the flue is partly blocked, which restricts draft and creates a fire hazard.
- Never-relined fireboxes. Plenty of 1970s and 80s masonry fireplaces still have their original liner, if they have one worth trusting. Add an undersized or damaged damper and the fireplace smokes no matter how good the wood is.
- Moisture damage at the crown and flashing. Wet Willamette Valley winters and constant moisture spall the mortar around the crown and flashing. That’s the pathway for water to get into the chimney structure, and it’s cheaper to fix early.
Pricing for Chimney Sweep in Tigard, OR
Here’s the honest range. A typical annual sweep in Tigard runs $180 to $340, with the figure set by the written estimate after we see the flue. Creosote that has glazed and needs chemical treatment runs higher than a routine brush-off, because it’s more work and it takes longer. A Level 2 camera inspection typically runs $250 to $450 depending on the chimney. Liner work is a separate conversation, and HeatShield resurfacing usually costs less than a full DuraFlex reline when the liner damage allows it. We give you the flat price before we book, and the estimate is free. Call (833) 538-5519 for an exact quote.
We Also Serve Cities Near Tigard
We work the whole Tualatin Valley and the towns around it. Homeowners in Tigard call us most, but we also cover Tualatin, West Linn, Gladstone and Oregon City. If you’re on the edge of town or out on a rural property with a wood stove, tell us where you are when you call and we’ll book the drive accordingly. Our chimney sweep team handles every town the same way.
Serving Tigard, OR – Our Local Coverage Area
We serve Tigard and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Tigard
Once a year for most homes, and more often if you burn damp wood or use the fireplace heavily. Tigard’s wet winters keep flues cold and damp between burns, which speeds creosote glazing, so a home burning wet fir and alder can need sweeping sooner than the yearly rule suggests. If you burn several cords a season, check the flue partway through. Call (833) 538-5519 for an exact quote, and estimates are free.
It’s usually creosote and soot holding the smell, often with a cold, damp flue that never fully dries out. A missing or damaged cap lets rain and animals in, which makes it worse, and an undersized damper keeps the smell from venting up and out. A sweep plus a cap repair clears most of it. Call (833) 538-5519 to book and we’ll show you what’s causing it.
It’s creosote that has baked into a hard, glazed, tar-like layer on the flue liner, and a standard brush won’t remove it. It matters in Tigard because smoldering damp wood in cold flues is exactly what produces it, so ordinary sweeps leave it behind. It has to be treated chemically before sweeping. Call (833) 538-5519 for an exact quote, and estimates are free.
Yes, especially on these older subdivisions where open flues collect squirrel and bird nests over summer. A cap keeps animals, rain and debris out, which protects draft and cuts the fire hazard from a blocked flue. We fit Copperfield and Famco components to match the chimney. Call (833) 538-5519 to get one quoted.
Expect a camera inspection first, because plenty of original fireboxes are still serviceable and don’t need relining. If the liner is damaged, HeatShield resurfacing can restore it without full replacement where the damage allows, and a full DuraFlex reline is the option when it doesn’t. We won’t recommend liner work without showing you the evidence. Call (833) 538-5519 for a free estimate.
If you’ve been burning damp wood all winter and can’t remember the last sweep, that’s the reason to call. We’ll sweep the flue, inspect it to the right level, and tell you plainly what needs doing and what can wait. One call covers sweep, inspection and repair. Call (833) 538-5519 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gresham Chimney Sweep.