Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Tigard
If your fireplace has started smoking back into the room or the mortar on your chimney is crumbling, you’re in the right place. We’re Gresham Chimney Sweep, and we handle chimney repair in Tigard for homeowners whose fireplaces and inserts actually get used. We know this town’s housing well: the ranch and split-level homes that spread through the Tualatin Valley subdivisions in the 1960s through the 1990s, most built around wood-burning masonry fireplaces that have now had a few decades of fir and alder burned through them. That history shapes what we find. Call (833) 538-5519 and we’ll set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Tigard Homeowners Call Gresham Chimney Sweep for Chimney Repair
Chimney work in Tigard rewards a specialist, because the problems here are specific. Our region’s wet, cool winters keep chimneys cold and damp between burns, and that’s exactly the condition that glazes creosote onto flue walls and pushes mortar toward deterioration. A general handyman who patches a crown without checking the flue has solved the visible problem and left the real one in place.
We stay inside the chimney trade. Sweeping, inspection, and repair all run through the same team, so when a cleaning turns up cracked clay tile you don’t get handed off to a second contractor. Our technicians have up to 14 years of experience, and we work with professional-grade product lines – DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield among them – because those are what hold up over time.
What we won’t do is talk you into a rebuild you can’t justify. If we recommend relining or resurfacing a Tigard chimney, you’ll see the camera footage first. That’s the standard we hold ourselves to, and it’s the reason homeowners in the area call us back. Call (833) 538-5519 for a free estimate.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Repair Companies in Tigard
Choosing among chimney repair companies in Tigard comes down to one question: will they show you why the repair is needed? The job itself usually starts with a camera inspection of the flue. In Tigard’s older subdivisions that footage frequently reveals what a brush alone can’t fix – a hairline crack running through a clay tile, creosote that has seeped behind the liner, or a firebox damper that no longer seals. When a Tigard homeowner needs repair rather than a cleaning, it’s almost always because something in that stack has failed and can’t be ignored. Typical repair work here runs $350 to $1,800 for localized fixes, while a full reline sits higher. The written estimate sets the final price.
Camera Inspection Before Any Repair
We run a camera down the flue and photograph what it finds, then walk you through the footage. You see the cracked tile or the glazed creosote yourself before we quote a repair. No evidence, no recommendation – that’s the rule.
The Range of Repair Work
Most Tigard repair calls fall into a handful of buckets: relining a failed flue, resurfacing a damaged liner with HeatShield, resetting a crumbling crown, and replacing a cap that’s gone missing. We handle all of it, so the whole chimney gets addressed instead of just the part that looks bad from the driveway.
Chimney Masonry Repair in Tigard
Chimney masonry repair in Tigard is largely a story about moisture. Brick and mortar absorb water, our rainy Willamette Valley winters keep everything wet, and then a cold snap freezes that moisture inside the masonry and forces it outward. Repeat that cycle for thirty years and you get spalling brick, joints that have eroded back from the surface, and a crown that’s cracked enough to let water straight into the flue. Repointing mortar joints typically runs $400 to $1,200 depending on how much of the stack is affected. Spalling brick repair and chimney waterproofing add to that. A partial rebuild on a badly deteriorated stack is a larger job, and we’ll tell you plainly when a repair can safely wait.
Repointing and Tuckpointing
Repointing cuts out the failed mortar and packs in fresh material matched to the original. Tuckpointing goes a step further, giving you a clean, finished joint line across the face of the chimney. Both stop water from working deeper into the brick.
Waterproofing and Flashing
A breathable waterproofing treatment on the masonry sheds rain without trapping moisture inside. Flashing repair at the roof line closes the gap where water sneaks in behind the chimney and shows up as a ceiling stain weeks later.
Trusted Brands We Service in Tigard
We specify professional chimney products because a repair is only as good as the materials in it. DuraFlex flexible liner systems are what we install when a flue needs relining; they’re the standard the trade specifies, not an off-brand substitute. HeatShield resurfacing restores a damaged liner in place where that’s appropriate, which can save a homeowner from a full reline. For caps and ventilation components we work with Olympia Chimney, Famco, and Copperfield. We don’t stock parts locally or run a warehouse – but the materials we install come from these established lines, and turnaround is quick once the plan is set.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Tigard Homes
- Cracked clay-tile liners. Decades of dampness and freeze-thaw crack and spall the tiles in 1970s and 80s Tigard homes. Creosote then seeps behind them, which is a hidden fire risk a brush can’t reach.
- Glazed third-degree creosote. Burning wet fir and alder in a cold chimney leaves a hard, tar-like glaze that a standard brush skips right over. It needs chemical sweeping to break it down.
- Undersized or damaged dampers. Original fireboxes in these homes often have dampers that no longer seal, letting warm room air escape up the flue and keeping the chimney cold between fires.
- Uncapped flues with nests. In the older subdivisions, birds and squirrels get into open flues and build nests, blocking draft. Debris left in a flue can ignite the next time the fireplace is lit.
Pricing for Chimney Repair in Tigard, OR
Here’s what repair work typically runs in Tigard’s market. Mortar repointing is generally $400 to $1,200. Chimney waterproofing lands around $300 to $700. Flashing repair at the roof line runs $250 to $600. A full reline with a stainless system sits higher, in the low thousands, and HeatShield resurfacing often costs less than a full reline when the damage allows it. A partial or full chimney rebuild is the largest job of all. What moves the number is the condition of the stack, how much of it is affected, and the materials specified. Nothing gets recommended without camera evidence you’ve seen. The written estimate sets the final price, and the estimate itself is free. Call (833) 538-5519 for an exact quote.
We Also Serve Cities Near Tigard
Tigard isn’t the only place we work. We also serve homeowners in Tualatin, West Linn, Gladstone, and Oregon City, each with its own mix of housing stock and its own chimney issues. If you’re just outside Tigard’s borders and want a sweep, inspection, or repair, call and we’ll sort out the details. Our chimney repair team covers the wider area.
Serving Tigard, OR – Our Local Coverage Area
We serve Tigard and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Tigard
Because many of the flues in Tigard’s 1960s – 1990s homes were left unlined or have clay tiles that have since cracked and shifted, so a routine cleaning often reveals a stack that never met modern codes for the appliance now vented into it. The camera footage shows exactly what’s failed. Call (833) 538-5519 for a free estimate.
Third-degree creosote is the hard, glazed, tar-like buildup that forms when fires smolder and the chimney stays cold – exactly what happens here when homeowners burn damp fir and alder through wet Willamette Valley winters. It doesn’t come off with a standard brush, so it needs chemical sweeping. Call (833) 538-5519 and we’ll take a look.
You usually can’t tell from the ground, which is why a camera inspection matters. Signs that point to it include smoky backdrafts, draft problems, and visible cracks at the top of the stack, but only the camera confirms it. We photograph what we find so you can see it yourself. Call (833) 538-5519 for an inspection.
Yes, a cap is worth having. In the older Tigard subdivisions, uncapped flues routinely let birds and squirrels in to build nests, and that debris blocks draft and can ignite the next time you light a fire. A cap with proper ventilation keeps animals and rain out while letting the flue breathe. Call (833) 538-5519 to get one fitted.
Yes, if it’s been sitting idle through our wet winters. Dampness and freeze-thaw keep working on mortar and clay tile whether or not you’ve lit a fire, and an unused flue can collect nests and debris. An inspection tells you whether that stack is ready or needs repair. Call (833) 538-5519 for a free estimate.
If you’re ready to know what’s going on inside your chimney, call (833) 538-5519 and we’ll set up a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Nothing gets recommended without camera evidence you can see for yourself.
Written by the team at Gresham Chimney Sweep.