Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Gresham?
Most chimney repairs in Gresham run between $275 and $1,400, with the average job landing near $600. Minor fixes like a new cap or a crown patch sit at the low end, while a partial reline or smoke chamber resurfacing pushes toward the middle and top of that range. The exact figure depends on what’s wrong inside the flue, how accessible the chimney is, and which materials the repair calls for.
We give free estimates on every repair, and the written estimate sets the final price. No surprises, no add-ons tacked on later. Call (833) 538-5519 to get one scheduled.
Chimney Repair Cost Breakdown (2026)
Here’s what the common repairs typically run in the Gresham market this year. These are estimates, not quotes – the written estimate after an inspection is what actually governs the job.
| Repair Type | Typical Range | What’s Involved |
|---|---|---|
| Chimney cap replacement | $275 – $650 | Removing a rusted or missing cap and installing a new Gelco, Famco, or Copperfield cap sized to the flue |
| Crown repair or rebuild | $400 – $900 | Patching cracks in the concrete crown or recasting it so water sheds away from the flue |
| Flue tile replacement (single tile) | $500 – $1,100 | Removing a cracked clay tile and setting a new one, or bridging the gap with a liner section |
| HeatShield liner resurfacing | $850 – $1,800 | Applying the HeatShield resurfacing system to restore a damaged clay liner without full replacement |
| Full stainless reline (DuraFlex) | $1,900 – $4,200 | Installing a DuraFlex flexible stainless liner sized to the appliance, insulated where required |
| Smoke chamber repair | $700 – $1,600 | Parging or resurfacing the smoke chamber so it pulls correctly and doesn’t leak |
| Masonry tuckpointing | $450 – $1,300 | Grinding out failed mortar joints and repacking them, usually on the portion above the roofline |
| Damper replacement | $350 – $800 | Swapping a seized or warped damper for a new top-sealing or throat damper |
| Water leak diagnosis and flashing repair | $300 – $950 | Finding where water is entering at the flashing or crown and sealing it correctly |
What pushes a job toward the top of these ranges? Access is the big one. A chimney that’s easy to reach from a roof valley is simpler to work on than one boxed in by a steep pitch or a tight setback. The condition of the flue matters too – a single cracked tile is a quick fix, but widespread spalling means the whole liner is compromised and relining becomes the sensible path. Material choice plays a role as well. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because those are the professional-grade lines that hold up, and using the right product the first time usually costs less than redoing a repair with generic parts.
What Affects Chimney Repair Pricing in Gresham
Two chimneys with the same visible problem can price differently, and it helps to know why before you compare estimates.
- Roof pitch and height. Gresham’s older neighborhoods have a mix of steep gable roofs and low-slope ranches. A steep pitch means more setup time, more safety rigging, and slower work. That’s part of what you’re paying for.
- Flue condition found during inspection. A hairline crack in one tile is a small repair. When the inspection turns up multiple cracked tiles, missing mortar, or a liner that’s broken apart, the scope changes and so does the price. This is why we sweep and inspect before we quote any repair – guessing at the flue from the ground wastes everyone’s time.
- Type of appliance. A wood-burning fireplace, a wood stove, and a gas insert each have different venting requirements. Gas inserts often need a properly sized liner to vent correctly, and wood stoves usually call for an insulated stainless liner. The appliance drives the material spec, and the material spec drives the cost.
- Water damage and hidden rot. The Pacific Northwest’s wet winters are hard on masonry. Water gets into cracks, freezes, expands, and repeats. By the time a homeowner notices staining on the ceiling or a loose cap, there’s often more damage behind it than expected. A thorough inspection surfaces that before the repair starts, not halfway through.
- Material and brand selection. Generic caps and off-brand liners are cheaper up front but often fail faster. We specify DuraFlex for relining because it’s the professional standard, and HeatShield for liner resurfacing because it can restore a damaged flue without a full tear-out. Those choices affect the line-item cost, but they’re what keeps the repair from coming back.
- Whether it’s a repair or a replacement. Sometimes patching a failing crown is the right call. Other times the crown is beyond patching and a rebuild makes more sense. We lay out both paths in the estimate so you can decide with real numbers in front of you.
How to Save on Chimney Repair
The single biggest saver is catching a problem while it’s still small. A $300 cap replacement today prevents a $1,200 crown rebuild two winters from now. Here’s what actually moves the number down:
- Get an inspection before the repair quote. It costs far less than guessing wrong and paying twice. The inspection tells us exactly what’s failed, so the estimate is accurate and you’re not paying for work the chimney doesn’t need.
- Fix the water intrusion source first. Leaks at the flashing, crown, or cap are common in Gresham, and water is what does the long-term damage. Sealing it early is cheaper than repairing the masonry it wrecks.
- Ask about HeatShield before assuming you need a full reline. Some damaged liners can be resurfaced instead of replaced. That’s a meaningful cost difference, and it’s a job many sweep-only companies can’t offer because they don’t carry the system.
- Bundle the sweep with the repair. If the chimney is due for a cleaning anyway, doing the sweep and the repair in one visit saves a second trip and a second setup.
- Get the free estimate in writing. A written estimate protects you from scope creep. We put the line items down in plain language, and that document is what the final bill reflects. Call (833) 538-5519 to set one up.
One caution on saving: don’t let a cheap quote pull you toward a handyman who doesn’t specialize in chimneys. A repair done with the wrong materials or without proper liner sizing can fail silently – the fire still burns, but the venting is compromised and carbon monoxide risk goes up. We work exclusively on chimneys and only with the professional product lines, and that specialization is what you’re paying for.
Why Chimney Repair Costs What It Does in Gresham
It helps to understand what’s actually in a chimney repair quote. The price reflects three things: materials, labor, and access. Materials for a reline include the stainless liner itself, insulation, a top plate, and a cap – that’s a DuraFlex system, not a piece of flexible duct from a hardware store. Labor includes the sweep first (you can’t inspect or repair a flue that’s coated in creosote), the inspection, the repair itself, and a final check that the draft pulls correctly. Access is the time it takes to set up safely on a roof, which in Gresham’s older housing stock often means working around steep pitches and mature trees.
We keep the sweep, inspection, and repair under one roof so you don’t get handed off to a second contractor when the inspection turns up a problem. That matters for pricing too – one company doing all three means one set of eyes on the chimney from start to finish, and no finger-pointing if something needs a second look. If you want to read more about how we approach repairs specifically, our chimney repair page walks through the methods and materials.
Repair vs. Replace: Which Is Cheaper?
Repair is almost always cheaper than replacement in the short term, but it isn’t always the right call. If the liner has one cracked tile, HeatShield resurfacing is the economical fix. If the flue is broken apart in several places and the masonry around it is sound, a DuraFlex reline is the durable answer. And if the chimney structure itself is failing – leaning, spalling bricks, missing mortar throughout – rebuilding may be the only safe option. We present the options honestly, with numbers, and let you decide. The written estimate sets the final price either way.
Why We Use Professional-Grade Materials
The brands we install aren’t a marketing point – they’re the reason a repair lasts. DuraFlex flexible liners are what professionals specify for relining because they’re tested and sized correctly for the appliance. HeatShield is a specialist resurfacing system that restores a damaged clay liner from the inside, which means less demolition and a shorter job. Gelco, Famco, and Copperfield caps and components cover the top of the chimney so rain and animals stay out and the whole system stays intact. A generalist handyman might patch a crack with mortar and call it done; we address the flue, the smoke chamber, the crown, and the cap as one system because that’s how a chimney actually works.
What a Typical Repair Visit Involves
We start with a sweep to clear creosote and soot so the flue can be seen, then an inspection with a camera to check the liner, smoke chamber, damper, and cap. From there we diagnose what’s failed and write up the estimate with line items. If it’s a straightforward repair and the parts are on hand, many jobs can be completed the same day. Larger jobs like a full reline or a crown rebuild get scheduled once the estimate is approved. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, keeps the schedule moving. We’re closed Saturdays.
When to Call Before It Gets Worse
Some signs shouldn’t wait. Water staining on the ceiling or chimney breast in Gresham is a leak – the flashing or crown has failed and the masonry is taking on water. A strong creosote smell or smoke backing into the room means the draft is compromised, often a liner or smoke chamber problem. Loose bricks or crumbling mortar at the roofline signal structural movement and need a look. And if a chimney has never been inspected since a wood stove or insert was installed, the liner sizing should be confirmed before another fire is lit. None of these are DIY territory. Call (833) 538-5519 and we’ll get someone out.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Gresham?
Most chimney repairs in Gresham cost between $275 and $1,400, with the average around $600. A cap replacement or crown patch runs $275 to $900, HeatShield liner resurfacing runs $850 to $1,800, and a full DuraFlex reline runs $1,900 to $4,200. For an exact quote on your chimney, call (833) 538-5519 – estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when the damage is limited – HeatShield resurfacing at $850 to $1,800 is well below a full reline at $1,900 to $4,200. Full replacement makes more sense when the liner is broken apart or the masonry is failing. An inspection tells you which path fits your flue. Call (833) 538-5519 for a free estimate with both numbers.
Why is chimney repair so expensive?
The cost comes from materials, labor, and safe roof access, not from markup. A proper reline uses a tested stainless DuraFlex system sized to the appliance, not generic flexible duct. Repairs also start with a sweep and inspection so the work is done to the right scope. Expect $275 to $1,400 for common repairs, and call (833) 538-5519 for a written estimate that itemizes the work.
Can you repair a chimney in the same day?
Many common repairs can be completed the same day once the inspection confirms the scope and the right parts are on hand. Larger jobs like a full reline or crown rebuild get scheduled after the estimate is approved. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, keeps the schedule tight. Call (833) 538-5519 to check availability for your repair.
Do I need a repair if my chimney is only leaking a little?
Yes – a small leak is still doing damage. Water gets into cracks in the crown or at the flashing, freezes over Gresham winters, and expands, which widens the crack and lets in more water each cycle. Catching it at the $300 to $950 flashing repair stage prevents a masonry rebuild later. Call (833) 538-5519 to have the leak traced and sealed.
Does a chimney inspection cost extra on top of a repair?
We give free estimates on repair work, so the number you see is the number you get once the scope is confirmed. The inspection and sweep that come before the estimate are how we make sure the quote is accurate, not a separate charge. Call (833) 538-5519 and we’ll set up a visit.
What brands do you use for chimney repair?
We use DuraFlex flexible liner systems for relining, HeatShield for liner resurfacing, and Gelco, Famco, Olympia Chimney, and Copperfield for caps and components. Those are the professional lines, not hardware-store substitutes, and they’re what keeps a repair from failing. Call (833) 538-5519 to talk through the right product for your chimney.
Ready to Get a Real Number?
A chimney repair is only as good as the diagnosis behind it. We sweep, inspect, and repair with the same team, using the professional-grade products that hold up – DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Our technicians have up to 14 years of experience, and we work exclusively on chimneys, not as a general contractor moonlighting in the trade. Pricing is set per job by the written estimate, and the estimate is free.
Call (833) 538-5519 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re looking for more on the services we cover across the area, start with Gresham Chimney Sweep and see where we can help.
Pricing reflects the Gresham market as of 2026. Gresham Chimney Sweep offers free estimates – call (833) 538-5519.
Written by the team at Gresham Chimney Sweep.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Ernesto Herrera"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Heather Kowalski"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Craig Quinn