Chimney Liner & Rebuild Cost in Gresham - Camera Evidence Before Any Quote

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (833) 538-5519

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Estimates 💲 Upfront Pricing · Free Estimates
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate
Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 538-5519

How Much Does Chimney Liner & Rebuild Cost in Gresham?

Chimney liner installation in Gresham typically runs $2,400 to $5,800 for a standard stainless flexible liner, while a partial rebuild of the chimney above the roofline usually lands between $3,200 and $8,500. A HeatShield resurfacing repair, which restores a damaged flue without full relining, generally costs $1,800 to $3,600. Every job gets a written estimate, and the final price is set by that estimate.

We’re Gresham Chimney Sweep, and liner work is what we do all day. We install DuraFlex flexible liner systems and apply HeatShield resurfacing, and we finish the job with caps and components from Gelco, Famco, and Copperfield so the whole chimney is addressed, not just the flue. Our technicians have up to experience. Call (833) 538-5519. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Key Takeaways

  • Full stainless liner replacement: roughly $2,400 to $5,800.
  • HeatShield flue resurfacing (no full reline): about $1,800 to $3,600.
  • Partial chimney rebuild above the roofline: $3,200 to $8,500.
  • Estimates are free, and the written estimate sets the final price.
  • Wood stoves and gas inserts often need a correctly sized liner, not a generic one.

Chimney Liner & Rebuild Cost Breakdown (2026)

Here’s how the numbers break down for a typical Gresham home. These are estimated ranges; your written estimate is what sets your price.

Line item Typical estimated range
Full stainless flexible liner (DuraFlex) $2,400 – $5,800
HeatShield flue resurfacing $1,800 – $3,600
Partial chimney rebuild (above roofline) $3,200 – $8,500
Full chimney rebuild (below roofline included) $8,000 – $18,000+
Chimney crown rebuild $450 – $1,200
Chimney cap and cover (Gelco, Famco, Copperfield components) $250 – $800
Liner inspection and sizing for a new insert or stove $150 – $350
Smoke chamber repair $600 – $2,000

What pushes the price higher is usually height and access. A chimney on a steep Gresham roof, or one that needs staging on a tight lot, takes more time and more safety setup. Masonry condition matters too: if the mortar and brick are sound, a liner install stays in the lower range; if the chimney is crumbling and needs rebuild work, you’re in the upper bands. Liner diameter and length change the material cost, and so does insulation. An insulated liner costs more up front than a bare liner but performs better for wood stoves.

What Affects Chimney Liner & Rebuild Pricing in Gresham

  • Chimney height and roof pitch. A taller flue needs more liner material and more time working at height, so a two-story chimney costs more to line than a single-story one.
  • Liner type and insulation. A bare stainless liner is the entry point; an insulated DuraFlex system costs more but is often the right call for wood-burning appliances.
  • Condition of the masonry. Spalling brick and soft mortar mean rebuild money. If the flue is sound enough for HeatShield, you can avoid a full reline and save.
  • Appliance type. A gas insert, a wood stove, and an open fireplace each need a correctly sized and rated flue; getting the sizing wrong wastes money and can be unsafe.
  • Local weather. Gresham’s wet winters and freeze-thaw swings work on masonry year after year, which is why so many local chimneys reach the point of needing rebuild work rather than just a sweep.
  • Access. Steep driveways, tall trees, and tight side yards mean extra setup for safe access, and that shows up in the estimate.

One thing worth knowing: liner and rebuild pricing isn’t a commodity. The material alone varies a lot between a professional-grade DuraFlex liner and an off-brand roll of flue pipe. That’s why we stick to what the trade actually specifies. A cheap liner that fails early costs more than the one you should have bought.

Want to talk it through?Free estimate, price agreed before work starts
Call (833) 538-5519

How to Save on Chimney Liner & Rebuild

You can’t shortcut safety, but you can keep the bill down with a few sensible moves.

  • Sweep and inspect before the problem grows. A routine sweep and inspection catches a cracked flue tile or a failing crown early, when a HeatShield resurfacing can spare you a full reline.
  • Ask whether resurfacing fits your flue. HeatShield restores many damaged liners without replacement. When it’s appropriate, it’s a real cost saving over a full liner.
  • Fix the cap now. A properly fitted cap from Gelco, Famco, or Copperfield keeps rain and wildlife out and protects the liner you paid for.
  • Address small masonry issues early. Repointing and crown repair cost far less than a partial rebuild once water gets in.
  • Get a written, itemized estimate. That way you know what you’re paying for and can compare like with like.

Estimates are free. Call (833) 538-5519 and we’ll walk your chimney and give you a written price. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

FAQs – Chimney Liner & Rebuild Cost

How much does a chimney liner cost in Gresham?

A full stainless flexible liner in Gresham typically costs $2,400 to $5,800, depending on height, diameter, and insulation. HeatShield resurfacing, when your flue qualifies, usually runs $1,800 to $3,600. Call (833) 538-5519 for an exact quote – estimates are free.

Is it cheaper to repair or replace a chimney liner?

Repair is often cheaper: HeatShield resurfacing generally costs less than a full reline, and it’s the right choice when the flue is still structurally sound. A full liner replacement is the better value when the existing liner is badly cracked or missing. A proper inspection tells you which side you’re on, and the written estimate sets the final price. Call (833) 538-5519 to get one.

How much does a chimney rebuild cost in Gresham?

A partial rebuild above the roofline typically runs $3,200 to $8,500, while a full rebuild that includes work below the roofline can start around $8,000 and go higher. The range depends on how much masonry has to come down and be replaced. Call (833) 538-5519 for a free, written estimate.

Can you come today?

Same-day service is often possible. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. Call (833) 538-5519 and we’ll find the soonest opening – no extra charge for same-day work; the estimate sets the price.

Why does Gresham weather drive up chimney repair costs?

Wet winters and repeated freeze-thaw cycles wear on masonry and mortar joints, so Gresham chimneys often need rebuild work sooner than in drier climates. Catching it early with a sweep and inspection is the cheapest path. Call (833) 538-5519 to schedule one in your part of Gresham.

What Happens When You Call

You reach us at (833) 538-5519 and we’ll book a visit. We sweep and inspect first, then give you a written estimate for whatever the chimney actually needs – whether that’s a HeatShield resurfacing, a DuraFlex liner, a rebuild, or just a new cap. One team handles the sweep, the inspection, and the repair, so you’re not handed to a second contractor mid-job. Estimates are free, and the written estimate sets the final price. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Need a price for your chimney cleaning?Free estimate, price agreed before work starts
Call (833) 538-5519

Why the Materials Matter

A liner or rebuild is only as good as what goes into it. That’s why we work with an established roster of professional chimney brands rather than whatever’s on the shelf at a hardware store. DuraFlex flexible liners are the professional standard for relining. HeatShield is a specialist resurfacing system that lets us restore a damaged flue where a full replacement isn’t necessary. Gelco, Famco, and Copperfield supply the caps and ventilation components that finish the job. We name these brands because the right materials are what make a repair last – not a vague promise of quality.

We specialize exclusively in chimneys. We’re not a general contractor moonlighting in flue work, and that focus is why we can tell the difference between a flue that needs resurfacing and one that needs relining.

Safety: Why Liner and Rebuild Work Is Not a DIY Job

A chimney liner carries combustion gases out of your home, and a cracked or missing liner lets those gases and heat reach the framing around it. Rebuild work means working at height on a roof, often in wet Pacific Northwest conditions. Both are jobs for trained technicians with the right equipment. We inspect first, explain what we find, and recommend the repair that keeps the chimney safe – never a shortcut that just looks fine from the ground.

Book Your Free Estimate

Whether you’re weighing a HeatShield resurfacing against a full reline, or facing rebuild work on a chimney that’s seen too many wet winters, the first step is a proper inspection and a written price. Call (833) 538-5519 to schedule your free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. One call covers sweep, inspection, and repair.

Pricing reflects the Gresham market as of 2026. Gresham Chimney Sweep offers free estimates – call (833) 538-5519.

Written by the team at Gresham Chimney Sweep.

What Our Customers Say

★★★★★ 4.8 from 6+ reviews

"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."

- Ernesto Herrera

"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."

- Heather Kowalski

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

- Craig Quinn
Need Chimney Cleaning help in Gresham? Licensed & insured · free written estimates
Call (833) 538-5519

Request a Free Estimate

Tell us what's going on in Gresham. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7