Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Gresham?
Chimney cap and crown work in Gresham typically costs between $185 and $640, depending on whether you need a simple cap installed, a masonry crown rebuilt, or both. A standard stainless cap with a mounting bracket usually runs $185 to $425 installed. A crown repair, where the cracked concrete at the top of the chimney is patched or entirely recast, lands between $290 and $640. When both jobs are done together, most Gresham homeowners land in the $420 to $850 range.
Those numbers cover materials and labor from a chimney specialist who installs professional-grade components, not a general handyman improvising at the top of a ladder. We answer 24/7 at (833) 538-5519, and estimates are free.
Key Takeaways
- A chimney cap installed in Gresham runs $185 to $425 for a standard stainless model.
- Crown repair or rebuild costs $290 to $640, depending on how much of the crown is damaged.
- Combined cap and crown work usually totals $420 to $850.
- Gresham’s wet winters and moss-friendly climate make a properly sealed crown the difference between a small repair and a masonry rebuild years down the road.
- One call covers the sweep, inspection, and repair, so you’re not handing the job off to a second contractor mid-stream.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s what the individual line items look like for the Gresham market in 2026. These are typical estimated ranges from a written estimate; the estimate you receive after we inspect your chimney sets the final price.
| Line Item | Typical Estimated Range |
|---|---|
| Standard stainless steel chimney cap (single flue, installed) | $185 – $295 |
| Multi-flue or custom cap (installed) | $295 – $425 |
| Decorative or copper cap (installed) | $385 – $640 |
| Crown patching and crack sealing (partial repair) | $290 – $410 |
| Crown rebuild (full recast, including removal of old crown) | $420 – $640 |
| Crown rebuild with masonry repair to the top courses of brick | $540 – $875 |
| Cap and crown package (both done in one visit) | $420 – $850 |
| Chimney inspection before the work | Free with the estimate |
The biggest swing factor is what we find under the cap. A crown with a couple of hairline cracks gets patched and sealed in an afternoon. A crown that’s been cracked for years lets water soak into the brick below it, and by the time freezes have done their work you may be replacing the top two or three courses of masonry along with the crown. That’s the difference between a $300 patch and a $800-plus rebuild. Caps themselves are the most predictable cost on the list, since the price is driven by the size of your flue and the material you choose rather than by condition. A single-flue stainless cap off the Gelco, Famco, or Copperfield lines is the workhorse choice, and it’s what most Gresham homes need.
What Affects Chimney Cap & Crown Pricing in Gresham
Gresham sits in the Willamette Valley’s rain shadow edge, where the winters are wet and the summers dry out fast. That cycle of soaking and drying is hard on masonry, and it’s why crown condition matters more here than in a drier part of the state. Here’s what pushes the price up or down on a given job.
- Flue count and size. A single-flue chimney takes a standard cap. A chimney with two or three flues serving a fireplace and a furnace needs a multi-flue cap or a custom-fabricated cover, which adds material and installation time. We size caps from the Gelco, Famco, and Copperfield product lines to match the actual flue opening so the fit is right the first time.
- Crown condition. A surface crack that hasn’t reached the brick gets sealed and re-coated. A crown that’s pulling away from the flue or has lost its slope gets cut out and recast. The more masonry the water has reached, the more the repair costs.
- Chimney height and roof access. A chimney that’s easy to reach off a low roof is a faster job than a tall chimney on a steep pitch. Height and pitch affect how much staging and safety setup the job requires, and that’s reflected in the estimate.
- Material choice. Stainless steel caps are the standard. Copper caps cost more but weather to a look many homeowners on older Gresham homes prefer. Decorative caps sit at the top of the range.
- Whether you add a sweep and inspection. Most homeowners book the cap or crown work alongside a sweep and inspection, since the technician is already on the roof. Bundling the visit is more efficient than booking separate trips.
- Local moss and debris. Gresham’s damp climate grows moss on masonry and shingles alike. Moss and debris trapped by a missing or damaged cap hold moisture against the crown, which speeds up cracking. Putting the cap back where it belongs is the cheapest way to slow that cycle down.
Why the Right Cap and Crown Materials Matter
A chimney cap does three jobs: it keeps rain out of the flue, it keeps birds and debris out, and it keeps sparks off your roof. A cheap cap that doesn’t fit properly does none of those well, and it’s often the reason a crown fails in the first place. We install caps and ventilation components from Gelco, Famco, and Copperfield, which are the lines chimney professionals specify because the fit and the gauge of the steel hold up to Gresham’s weather.
The crown is where the real material difference shows. A crown recast with the right mix and the right slope sheds water away from the flue and the brick below it. Done poorly, or patched with the wrong sealant, the water finds its way back in within a couple of winters. That’s why we approach crown work as a masonry job with a proper slope and a sealed bond to the flue, not as a caulk-and-forget repair.
If the inspection turns up a damaged flue liner while we’re up there, we handle that too. We install DuraFlex flexible liner systems, the professional standard for relining, and we apply HeatShield resurfacing to restore a damaged liner without full replacement where the condition allows. That means one call covers sweep, inspection, repair, cap, and crown, rather than handing you off to a second contractor when the flue turns out to need work. Homeowners searching for a full-service option can start with Gresham Chimney Sweep.
How to Save on Chimney Cap & Crown
There’s no coupon for good masonry, but there are a few practical ways to keep the cost down without cutting corners on the materials.
- Fix the problem before water gets into the brick. A crown that gets patched while the cracks are still shallow stays in the $290 to $410 range. Wait until freeze-thaw cycles have opened the brick, and you’re looking at a rebuild that runs $540 to $875. Catching it early is the single biggest saver on this list.
- Keep the cap on. A missing or rusted-out cap is an open door for rain, birds, and debris, and it’s the most common reason a crown fails. Replacing it at $185 to $295 is far cheaper than the crown repair that follows.
- Combine the visit. Book the cap or crown work alongside your annual sweep and inspection so the technician is already on the roof. One trip is more efficient than two.
- Choose stainless over decorative if budget is the concern. A standard stainless cap from the Gelco, Famco, or Copperfield line performs just as well as a copper one. Save the copper for when the look matters to you.
- Get a written estimate first. Estimates are free. Call (833) 538-5519 and we’ll look at the chimney and give you a written price before any work starts, so there are no surprises.
How Long Does Chimney Cap & Crown Work Take?
Most cap installations take under two hours. A crown rebuild is a longer job, usually half a day to a full day, because the old crown has to come off, the masonry beneath it checked, and the new crown formed, sloped, and left to cure properly. We schedule crown work with enough time to do it right rather than rushing the cure, because a crown that sets too fast cracks and you’re back where you started. We answer 24/7 at (833) 538-5519, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
How Do You Know If Your Chimney Crown Needs Repair or Replacement?
Look for three signs: a visible crack running across the top of the crown, a crown that’s pulling away from the flue pipe, or water staining on the brick below the crown. Any of those means it’s time to have it looked at. A crown that still has a clear slope and no separation is a candidate for patching. One that’s lost its slope, has multiple cracks, or is separating from the flue needs a rebuild. The only way to know for sure is to have a technician on the roof, which is part of every free estimate.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Gresham?
A chimney cap installed in Gresham typically costs $185 to $425. Standard single-flue stainless caps sit at the low end, and multi-flue or custom-fabricated caps sit higher. Call (833) 538-5519 for a free estimate on your specific flue size.
How much does it cost to repair a chimney crown in Gresham?
Crown repair in Gresham usually runs $290 to $640. A patch-and-seal on surface cracks is at the low end; a full crown rebuild with masonry repair to the top courses is at the high end. The written estimate after inspection sets the final price. Call us for a free look.
Is it cheaper to repair or replace a chimney crown?
Repairing a crown is almost always cheaper than replacing it, as long as the damage is caught early. Patching and sealing runs $290 to $410, while a full rebuild runs $420 to $640 or more if masonry below the crown has to come out. Catching cracks before they reach the brick is the cheapest route. Call (833) 538-5519 and we’ll tell you which one your chimney needs.
Can I install a chimney cap myself?
We don’t recommend it. Chimney work happens at height, on a roof with a steep pitch in many Gresham homes, and a cap that’s sized wrong or mounted poorly lets water in and can loosen in wind. A professional installation runs $185 to $425 and includes the right fit and a secure mount. It’s not a job for a ladder and a Saturday afternoon.
Does chimney work require a permit in Gresham?
Most chimney cap installations don’t require a permit, since they don’t alter the structure. A crown rebuild is masonry work that may require one depending on the scope, so ask your city’s building department. We’ll tell you at the estimate what we expect for your job. Call (833) 538-5519.
How often should a chimney cap or crown be checked?
Once a year, ideally with your annual sweep and inspection. Gresham’s wet winters and dry summers cycle moisture through masonry, and a small crack that’s caught in year one is far cheaper to fix than one that’s been through three winters of freezing. Call (833) 538-5519 and we’ll check both as part of your inspection.
Does a chimney cap affect heating efficiency?
Yes, in a modest way. A properly fitted cap keeps rain and debris out of the flue, which protects the liner and keeps the draft working cleanly. The main value is protecting the chimney from the moisture damage that leads to costly crown and liner repairs, not boosting heat output. A correctly sized cap from Gelco, Famco, or Copperfield does that job well.
Why Choose Gresham Chimney Sweep for Cap and Crown Work
Chimneys are what we do. We’re not a general contractor adding chimney work to a long list of services. Our technicians have up to experience, and we install and repair using the same professional-grade products professionals specify: DuraFlex for liner systems, HeatShield for liner resurfacing, and Gelco, Famco, and Copperfield components for caps and ventilation. That matters because the materials behind a cap or crown determine whether it holds up through a Gresham winter or fails in a couple of seasons.
One call covers the sweep, inspection, and repair, so a problem found during the inspection gets fixed by the same team. No second contractor, no re-explaining the situation. Homeowners across Gresham can reach us at (833) 538-5519. We answer 24/7. Fast dispatch runs 7am to 7pm, Sunday through Friday.
Get a Free Chimney Cap & Crown Estimate in Gresham
If your chimney cap is missing, rusted, or loose, or if you’ve spotted cracks in the crown, it’s worth having it looked at before winter does more damage. Call (833) 538-5519 for a free estimate on your Gresham chimney. We answer 24/7, dispatch from 7am to 7pm Sunday through Friday, and we’ll give you a written price before any work begins. The written estimate sets the final price, so you know what you’re paying before a technician ever climbs the ladder. Estimates are free, and one call covers the sweep, inspection, and repair.
Written by the team at Gresham Chimney Sweep.
Pricing reflects the Gresham market as of 2026. Gresham Chimney Sweep offers free estimates – call (833) 538-5519.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Ernesto Herrera"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Heather Kowalski"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Craig Quinn