Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Tualatin
When a Willamette Valley storm leaves a water stain on the ceiling beside your chimney or drops a cap onto the roof, you need someone who knows Tualatin’s housing and its weather. We handle chimney repair for Tualatin homeowners, from river-bottom ranches near Nyberg Woods to the two-story homes up on the hillsides. Our technicians have up to 14 years of experience and work with professional-grade materials, not hardware-store substitutes. Call (833) 538-5519 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Tualatin Homeowners Call Gresham Chimney Sweep for Chimney Repair
We’re a chimney specialist, not a general contractor fitting chimneys in between deck builds. That focus matters in Tualatin, where the work splits between old clay-tile masonry and newer factory-built systems that need different brushes, cameras, and repair methods. One call covers sweep, inspection, and repair, so you don’t get handed to a second contractor when we find a cracked crown or a rusted damper.
Our repairs use brands the trade specifies: DuraFlex flexible liners, HeatShield resurfacing, and caps from Olympia Chimney, Famco, and Copperfield. When we recommend a fix, we show you the camera evidence first, and we’ll tell you plainly when a repair can safely wait. Response time to Tualatin is quick, and estimates are free. Call (833) 538-5519.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Tualatin
Chimney Masonry Repair in Tualatin usually starts with water. Months of wet winters soak into brick and mortar, and the freeze-and-thaw cycles that follow open hairline cracks into real ones. Spalling brick, crumbling mortar joints, and a cracked crown are the three failures we see most in the older single-story ranches west of Interstate 5. Typical masonry repair in Tualatin runs $450 – $1,800, with a written estimate setting the final price.
Repointing and Tuckpointing
Repointing grinds out failed mortar and packs fresh material into the joints, while tuckpointing matches the new mortar to the original color and profile. Both stop water from working its way behind the brick, which is what pushes a small repair toward a rebuild. Most Tualatin repointing jobs fall in the $450 – $900 range.
Crown Rebuild and Waterproofing
The crown is the concrete cap on top of the chimney, and when it cracks, water runs straight down into the flue. Rebuilding a crown typically costs $500 – $1,200 in Tualatin, and a breathable waterproofing treatment afterward adds a few hundred dollars while slowing the next decade of moisture damage. We use HeatShield where a damaged liner can be resurfaced rather than fully replaced.
Chimney Cap Installation in Tualatin
Chimney Cap Installation in Tualatin is the single most useful repair for a chimney that keeps getting wet. Many of the original 97062 neighborhoods, especially around the Tualatin River greenway and Nyberg Woods, were built with no rain cap at all. That’s code-legal but moisture-prone: river fog and wind-driven rain drop straight down the flue, rusting fireboxes and staining masonry from the inside out. A stainless cap with a spark screen typically runs $250 – $650 installed in Tualatin, and it keeps rain, birds, and debris out year-round.
Choosing the Right Cap
Factory-built gas and pellet inserts on the east-side subdivisions need a cap matched to their specific venting, not a universal one. We supply and install caps through Gelco, Famco, and Copperfield so the fit is correct and the screen holds up. A loose or missing cap after a windstorm is one of our most common calls.
Securing a Displaced Cap
When a storm knocks a cap loose, the fix isn’t just setting it back down. We check the flue top and crown for damage the cap may have been hiding, then anchor the new cap so the next gust doesn’t repeat the problem.
Trusted Brands We Service in Tualatin
We work with an established roster of professional chimney brands: DuraFlex flexible liner systems, HeatShield resurfacing, and caps and components from Olympia Chimney, Famco, and Copperfield. These are the materials the trade specifies, and they’re what we recommend because they hold up to Tualatin’s wet winters. We don’t claim to stock parts locally; what we do is source the right component for your chimney and install it correctly, so you’re not waiting on a generic substitute that doesn’t fit. That means fewer repeat visits and a repair that lasts.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Tualatin Homes
- Wind-driven rain in uncapped flues. Older ranch homes without a rain cap take water straight down the flue, which rusts dampers and stains the smoke chamber. A proper cap solves most of it.
- Cracked crowns and spalling brick. Years of wet winters crack the crown and pop the faces off brick, letting water migrate into the liner. Repointing and a crown rebuild stop the cycle.
- Flashing failures at the chimney base. When flashing pulls loose, water shows up as a ceiling stain after a storm, and homeowners often mistake it for a roof leak. A chimney pro can tell the difference.
- Cracked clay tile liners in the original core. The 1960s-80s masonry chimneys frequently have cracked tiles from years of moisture and heat cycling, which we catch on camera inspection before they become a fire risk.
Pricing for Chimney Repair in Tualatin, OR
Here’s a straight look at what chimney repair costs in Tualatin. A basic sweep and inspection runs $175 – $350. Masonry repointing or tuckpointing typically runs $450 – $900, a crown rebuild $500 – $1,200, and a stainless cap installed $250 – $650. Flashing repair usually falls in the $300 – $700 range, and a full reline with DuraFlex runs higher, quoted per chimney. What moves the price is access, how much masonry needs replacing, and whether the liner can be resurfaced with HeatShield instead of fully relined. The written estimate sets the final price, and estimates are free. Call (833) 538-5519 for an exact quote.
We Also Serve Cities Near Tualatin
We serve homeowners throughout the Tualatin area, including Tualatin and the surrounding communities of Tigard, West Linn, Gladstone, and Oregon City. If you’re just outside the city line, reach out and we’ll confirm coverage. Our chimney repair team handles sweep, inspection, and repair in one visit, so the rainy-season scramble doesn’t turn into three separate appointments.
Serving Tualatin, OR – Our Local Coverage Area
We serve Tualatin and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Tualatin
Because many of the original 97062 homes were built without one, especially near the river greenway and Nyberg Woods, so fog and wind-driven rain go straight down the flue. That rusts fireboxes and stains masonry over time. A stainless cap with a screen fixes it, typically $250 – $650 installed. Call (833) 538-5519 for an exact quote.
A ceiling stain directly around the chimney is usually flashing, not the roof itself. Flashing is the metal seal where the chimney meets the roof, and when it pulls loose, water tracks down the masonry. A camera inspection confirms it before anyone starts tearing into shingles.
Yes. Even inserts that don’t burn wood need the venting checked, the cap inspected, and the flue swept of debris. The newer two-story subdivisions on the hillsides mostly have these systems, and they need specialized brushes and cameras, not the tools used on masonry. Call (833) 538-5519 to book an inspection.
Creosote builds in three stages: a light soot that brushes away, a glazed crust that’s harder to remove, and a hardened, tar-like layer that’s a serious fire risk. Third-degree creosote can call for more than a sweep, sometimes a chemical treatment or liner work. A camera inspection tells you which stage you’re at. Call (833) 538-5519 for a free estimate.
Yes, because Tualatin’s wet winters cause damage whether or not you’re burning. Rain, fog, and storm-driven water crack crowns and rust dampers even in a chimney that sits idle. A yearly inspection catches that before it becomes a rebuild. Call (833) 538-5519 – estimates are free.
Storm damage, a missing cap, or a ceiling stain near the chimney? Call (833) 538-5519 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. One call covers sweep, inspection, and repair across Tualatin.
Written by the team at Gresham Chimney Sweep.